You access this dialog from the Project Review Pane by clicking on the project type hyperlink (highlighted below):
The Project Review Settings Dialog allows you to pick the project type used by review and to adjust the review thresholds for each project type.
The presets for Project type are:
• High quality manually marked: when your model is well built, though most or all points are manually marked, non-target points.
• High quality sub-pixel marked: when most or all points are sub-pixel marked circular target points.
• Unknown/Inverse camera: when the project has been set up as an Inverse Camera type of project.
• Standard manually marked: when most or all points are manually marked, non-target points.
Select the Project type that most closely resembles your project. The thresholds can be adjusted if need be, but the defaults usually help provide a good indication of model quality of this type. If you have verified your model is all correct and can accept a slightly higher maximum point mark residual (e.g. so that you can focus on other problems), increase the threshold accordingly.
A goal for every project is to get a clear review (with no reported problems). This is done by picking the correct project types, by fixing problems and lastly adjusting thresholds if not appropriate for your particular project.