The following table shows various supported file formats for import.
The Text File Import Filter Dialog is used to customize the data imported from a text file (e.g., .txt, .csv, .ctl).
Type of import |
Type of external geometry |
Type of files |
Distances |
.txt/.csv/.ctl 1,2 |
|
|
X,Y,Z point positions |
.txt/.csv/.ctl 1, .dxf, .obj, .3ds |
Point Cloud X,Y,Z |
.txt/.csv/.ctl/.asc/.xyz 1, .las, .stl, .dxf, .obj, .ply, .byu, .facet, .3ds |
|
Geographic x,y,z point positions |
.txt/.csv/.ctl 1, .dxf, .obj, .3ds |
|
|
Imported points, lines and/or surfaces |
.txt/.csv/.ctl 1, .dxf, .obj, .3ds |
Point Cloud X,Y,Z |
.txt/.csv/.ctl/.asc/.xyz 1, .las, .stl, .dxf, .obj, .ply, .byu, .facet, .3ds |
|
Geographic x,y,z point positions (only in PhotoModeler Premium) |
.txt/.csv/.ctl 1, .dxf, .obj, .3ds |
|
Imported points, lines and/or surfaces |
.txt/.csv/.ctl 1, .dxf, .obj, .3ds |
|
Point Cloud X,Y,Z |
.txt/.csv/.ctl/.asc/.xyz 1, .las, .stl, .dxf, .obj, .ply, .byu, .facet, .3ds |
|
X,Y,Z point positions |
txt/.csv/.ctl 1, .dxf, .obj, .3ds |
|
Distances |
.txt/.csv/.ctl 1,2 |
|
Point IDs defining a scale/rotate/translate or multi-point transform |
.ini 3 |
1 See Text File Import Filter Dialog for information on importing data from a text file.
2 Text files with distance measurements should be formatted with each line containing a name of the measurement, with no spaces in the name, followed by the distance.
E.g.
Wall_A 10.03
Wall_B 14.534
Etc.
3 Coded target definitions are setup using the Coded Target Coordinate Definition file format.